|
Model: SIMCO MINion2
Product: SIMCO MINion2
MinION2 (minion2), is for the management of electrostatic sensitive equipment assembly process and equipment inspection machines, such as the use of static electricity and other countermeasures were developed.
It achieves the stable DC loaded with the new development of the control circuit and the discharging needle configuration, alone the ion automatic balance technology of ion balance control, stable electrical performance and high speed in addition to electricity. Its compact design, simple installation. To install the confined place spring handrail lamp work area removal.
Specifications:
this design has a powerful effect.
newly developed automatic balance technology stabilized the ion balance (+ 10V).
alone in the discharge pin configuration high-speed power (2 seconds or less: distance 300mm).
Modular low voltage wiring (DC24v).
standard adapter is used, it can be connected to 5 units (max 2A) according to the power supply of the device.
no stage air volume adjustment.
with abnormal signal output, contacts (COM, N.O, N.C.)
Power removal time Within 2 seconds
(from ± 1000V to gradually reduce the time required for the 100V charged voltage)
(measuring distance 300mm, center measurement, maximum wind speed)
Ion balance range 0±10V
* ESD-STM3.1-2000 IONIZATION, ANSI for standard test
input DC24V, 250mA, 6W
Special AC/DC
Adapter
Input: AC100-240V, 0.5A,
Output: DC24V, 0.75A, Max 18W
Using ambient temperature and humidity 0 to 50
noise level Max. 52dB-A (in distance 600mm test)
Discharge pin Stainless steel emitter, 6
Power switch ON-OFF switch (rear)
Air volume No stage adjustment
Indication lamp
Green - power input when the lights are bright, red - when the lights are abnormal
Connector
RJ-11 x 2 (input power)
Power input and abnormal alarm output
Outline dimension 97 * 137 * 60MM (solid part)
weight 0.5Kg
Casing White, reinforced polycarbonate
Work light Stainless steel nickel plated
|
