-
Hot Air Rework System enabling registration of temperature profiles, reliably controls the Heating processes of lead-free solder
-
For lead free solder – consistent hot air and accurate temperature control enable lead-free operation.
-
Outlet nozzle featuring new mechanism—consistent temperature of hot air is allowed by new mechanism
-
Digital display – Temperature can be controlled easily
-
Temperature control with sensor- feedback system – The sensor inside the pipe controls the temperature.
-
Lock out key controlled—Preset temperature can be locked with the control card.
-
Featuring airflow meter – Easy to control the airflow volume visually.
-
Compact design
-
ESD safe by design
-
Easy process control – Enabling numerical management of temperature, airflow, and time in the Automatic mode.
-
3-step temperature setting – Temperature and time can be set in three steps.
-
3 temperature profiles can be memorized – Up to three temperature profiles can be registered memorized.
-
Featuring offset function
-
Automatic cool-down function – To avoid the heater damage, the cooling begins automatically when the power to the heater is shut off. The air stops blowing as soon as the temperature reaches 100 degree C.
-
Power-saving function – The power save function automatically turns off the hot air when it has blown continuously for a specified amount of time in manual mode. Power to the heater is turned off and then the air is stopped. (selectable from 30min/60min/Infinite)
-
Featuring vacuum pickup function – This function absorbs the removed IC with vacuum.